Key Points:
- An adjustable Raven RP24Si door stop seal for noise, light and smoke
- An aesthetic appearance
- Quick and easy to install
- RP24 has been granted an Australian Design Award
- It is an effective acoustic seal when tested in accordance with BS EN ISO 717.1
-
Symbol Guide
Description:
An adjustable door stop seal for noise, light and smoke. The RP24 seal uses independently adjustable fasteners to achieve up to 8mm sealing adjustment for maximum noise control.
The seal can be butt jointed at the corners to produce an easily installed continuous seal around the door frame. Its aluminium carrier is sturdy and slotted for adjustment with concealed fixings. It is quick and easy to install around the jamb and head and can be fitted without removing the door.
It is tamper proof with fully concealed fasteners to give the seal an aesthetic appearance. The closed cell S.E. Sponge E.P.D.M. seal requires only normal door closing force. If fixing to rebated frames of single doors, specify a long backset door latch. RP24 has been granted an Australian Design Award.
It is an effective acoustic seal when tested in accordance with BS EN ISO 717.1.
Specification:
- Location: Head and jambs of single and double butt hinged doors.
- Min/Max Gap: 0mm/8mm.
- Fixing Method: Zinc plated cross recess head S.T. screws of the appropriate size are supplied.
- Adjustment: Can be adjusted by 8mm independently of the fixing screws.
- Seal Material: Closed cell EPDM sponge, self extinguishing (black).
- Seal Sizes: Single Door Set - 2 x 2.1m plus 1 x 1m
- Finish: Anodised Satin Clear.
- NOTE: Different gasket profile conforms to bca spec c3.4
Installation:
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@stormflame.com
Maintenance:
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.
Competency:
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Additional Notes:
For further information on installation requirements please refer to the door manufacturer data to ensure the compatibility of this product, if in doubt please contact the technical team on: Tel: +(0)1329 841416 or email sales@stormflame.com
Download and review any of the following information:
No reviews have been left for this product, be the first to
leave a review