Call us: 01329 841 416
Fast Delivery on all in stock items

Ironmongery Protection Flexiseal Fire Door Kit

Intumescent Ironmongery Sheet Material For Fire Doors (200x200)

Intumescent Ironmongery Sheet Material For Fire Doors (200x200)

£1.78 £1.48 (ex. VAT)
A flexible intumescent sheet material for Fire Doors (FD30 and FD60).


Key Points:

  • Intumescent sheet material for FD30 and FD60
  • Flexible intumescent ironmongery material
  • Various packs available
  • Test in accordance with BS 476 Part 20 & 22 : 1987
  • up to 60 minutes fire rating

A flexible Intumescent sheet material for Fire Doors (FD30 and FD60). Stormflame recommends this Intumescent sheet material when working and installing fire doors. Protect your area with the Intumescent sheet material and slow the rate of fire/smoke spreading. The flexible Intumescent sheet material has been fire tested in accordance with BS 476 Part 20 & 22 : 1987 and has up to a 60 minute fire rating.


  • Standard sizes: 200 X 200mm
  • Packaged in poly bagged
  • Only 0.8mm thick


We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email


All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.


It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.

Additional Notes:

Each fire door and hardware component will have its own test evidence. It is the responsibility of the purchaser to ensure that the product is fully compliant with the relevant test evidence. For further information contact the technical team on Tel: +(0)1329 841416 or email

Download and review any of the following information:

  • Product Code:
  • MPN:
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review