Intumescent Fire Rated Pillows CE/UKCA Marked (Small 330mm x 200mm x 25mm)

Key Points:

• CE & UKCA Marked.
• UL-EU Accreditation.
• Cable trunking by UL assessment.
• Classified in accordance with EN13501-2.
• Fire Pillows tested with metallic pipes, cables, cable bunches, cable trays and cable ladders, please refer to the test certification.
• Fire Resistance EN 1366-3 EI 120.
• Fire Classification EN13501-2.
• BS 7671-2008 Chapter 42 & 52 - Electrical Installations Fire Resistance.
• Tested in accordance with EN10140-2: 2010 - Airborne Sound.
• Tested in accordance with EN10126: 2000 Air Permeability.

Descriptions:

These Intumescent Fire Rated Pillows are designed to provide an effective fire barrier, on a temporary or permanent basis, for services which are subject to frequent changes or replacement. The fire pillows consist of a waterproof glass cloth bag containing organic fillers and intumescent additives.

Pillows can be added, removed or rearranged in an aperture to accommodate to the needs of the situation and have been tested with metallic pipes, cables, cable bunches, cable trays and cable ladders.

Tested in block wall, concrete and masonry walls and concrete floors up to 1m² area and suitable for indoor and outdoor locations pillows remain flexible between 5°C to +40°C.

*For specific details please refer to the test certification.

Specification:

• X-Series fire pillow size: Small 330mm x 200mm x 25mm 

Installation:

We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@stormflame.com

Maintenance:

All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.

Competency:

It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.

Additional Notes: 

Please refer to the ETA/UKCA/UL-EU sheet for fields of application for this product. For further information on installation requirements please refer to the manufacturer of the services and the wall/floor specification to ensure the compatibility of this product, if in doubt please contact the technical team with services and wall/floor specification on Tel: +(0)1329 841416 or email sales@stormflame.com

Download and review any of the following information:

Certification/Fire Test Reports:

'UL Documentation' are 'UL - EU Certificate'