- Fire Resistant Board for sealing service penetrations in walls or floors.
- Fire Resistant testing to EN 1366-3 : 2009 and BS 476 Part 20 : 1987.
- Fire Classification to EN 13501-2.
- Air Permeability testing to EN 1026.
- Acoustic Isolation testing to EN 10140.
- Suitable for indoor use without additional environmental protection.
Specifically designed for sealing around service penetrations in walls and floors, a single Fire Rated Ablative Coated Mineral Batt (50mm or 60mm thick) can provide high levels of fire integrity and insulation.
Tested in Block Wall, Concrete, Masonry, Plasterboard Partition and tested in Concrete Floors.
Offering up to 4 hours fire resistance in accordance with BS476: Part 20: 1987 and EN 1366-3 : 2009. Up to Rw 60dB sound reduction please refer to the technical department.
These Fire Boards consist of a stone fibre core coated on both sides with Fire Rated Ablative Batt Coating-Spray Grade which transforms during a fire to prevent the passage of fire and smoke and the transfer of heat.
These Fire Boards cut edges or joints should be coated with Fire Rated Ablative Batt Coating-Spray Grade or Fire & Acoustic Rated Intumescent Mastic.
*For specific details please refer to the test certification.
- Batt : 600mm x 1200mm x 50mm: 140kgm³ density. (Single Pack)
- COATING: 5kg Tub
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email firstname.lastname@example.org
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Please refer to the ETA/UL-EU sheet for fields of application for this product. For further information on installation requirements please refer to the manufacturer of the services and the wall/floor specification to ensure the compatibility of this product, if in doubt please contact the technical team with services and wall/floor specification on Tel: +(0)1329 841416 or email email@example.com
Download and review any of the following information:
Certification/Fire Test Reports:
CE Marked Documents
'DoP's are 'Declaration of Performance'
'CoC's are 'Certificate of Constancy of Performance'
'TDS's' are 'Technical Data Sheet'
'ETA's' are 'European Technical Assessment Sheet'
'UL Documentation' are 'UL - EU Certificate'