- Astro Coat - Spray Grade
- Astroflame Ablative Coating - CE Marked
- Astro Coat is a water-based, acrylic, ablative coating with excellent fire, water, air permeability and elastomeric properties.
- Astro Coat Spray Grade Coat is a thin formulation ablative coating for use with Astro Batt fire board: application is by spray, brush or pouring.
- It is used to seal the edges around the services and between the substrate and the batt before installation.
- UL-EU Listed
- Certifire Approval
- Fire Resistance Testing to EN 1366-3 : 2009.
- Fire Resistance Testing to BS 476 Part 20 : 1987.
- Fire Classification to EN 13501-2.
- Air Permeability testing to EN 1026.
- Acoustic Isolation testing to EN 10140.
Prevents the passage of fire, smoke, air and sound between fire rated compartments and has been tested in block wall, concrete, masonry, plasterboard partition and concrete floors.
Fire protects service penetration openings containing metallic pipes, cables, cable trays and trunking. Can be used to coat service insulation as part of the sealing system. At normal temperatures the coating remains flexible to permit thermal and mechanical movement of services and the building structure.
Suitable for large openings in walls and floors with additional supports.
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email firstname.lastname@example.org
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 – Code of Practice for the Installation and Inspection of Fire Stopping.
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Download and review any of the following information:
Certification/Fire Test Reports:
CE Marked Documents
'DoP's are 'Declaration of Performance'
'CoC's are 'Certificate of Constancy of Performance'
'TDS's' are 'Technical Data Sheet'
'ETA's' are 'European Technical Assessment Sheet'
'UL Documentation' are 'UL - EU Certificate'