Call us: 01329 841 416
Fast Delivery on all in stock items

Intumescent Strip - Fire & Smoke Seal - 60 minute Rated 20mm

Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey)

Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey) | Stormflame
Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey) | Stormflame
Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey) | Stormflame
Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey) | Stormflame
Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey) | Stormflame

Fire & Smoke Seal - 60 minute Rated 20mm (Red/Grey)

£2.99 £2.49 (ex. VAT)

Quantity:

Key Points:

  • Tested in accordance with BS476 Part 22 : 1987.
  • 60 minute rated fire seal
  • Smoke seal tested to EN1634-3.

Description:

Essential seals for your fire door assemblies. These seals provide a permanent barrier to smoke - particularly important as smoke fumes travel faster and further than the fire itself.

Please Note:
Each fire door will have its own test evidence from the door manufacturer. It is the responsibility of the purchaser to ensure that the seals are fully compliant with the relevant test evidence.

Specification:

  • Lengths: 2.1m
  • Widths: 20mm
  • Carrier Colour Red
  • Smoke Seal brush colours available: Grey.

Installation:

We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@stormflame.com

Maintenance:

All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.

Competency:

It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.

Download and review any of the following information:

  • Product Code:
    AFFSR2042/GB
  • MPN:
    AFFSR2042/GB
product review overlay image

Customer reviews

No reviews left yet
Write a review

No reviews have been left for this product, be the first to leave a review