Key Points:
- A weather and acoustic seal
- RP93Si is quick and easy to install
- Suitable for plain or rebated frames
Symbol Guide
Description:
A weather and acoustic seal suitable for plain or rebated frames. RP93Si is quick and easy to install (mitre joint only), to the head and jambs without removing the door. Slotted for installation adjustment, the soft silicon bulb accommodates a tighter seal and, with a tamper proof cover strip, provides a fit and forget feature.
Note: If fixing to rebated frames of single doors specify a long backset door latch. The tamper proof aluminium cover strip is not recommended for removal once installed, refer RP78Si or RP10Si for this feature.
Specification:
- Location: Head and jambs of single or double broad butt hinged doors.
- Min/Max Gap: 0mm/ 6mm.
- Fixing Method: Zinc plated, cross recess head S.T. screws of the appropriate size are supplied.
- Seal Material: Silicon Rubber (charcoal).
- Replacement Seal: RP393Si
- Available in Double Door Sets - 3 x 2.1m
Installation:
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@stormflame.com
Maintenance:
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.
Competency:
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Additional Notes:
For further information on installation requirements please refer to the door manufacturer data to ensure the compatibility of this product, if in doubt please contact the technical team on: Tel: +(0)1329 841416 or email sales@stormflame.com
Download and review any of the following information:
No reviews have been left for this product, be the first to
leave a review