Door Bottom Seals
Raven multipurpose door bottom seals designed for general weatherproofing and draught proofing applications. Common forms comprise sweep seals that have an aluminium holder with a flexible strip of rubber or brush strip mounted to the door bottom. They are designed to sweep across the floor or engage a raised threshold plate so they clear the floor as the door opens.
Automatic door bottom seals are mechanically spring loaded seals that lift clear of the floor as the door opens and seal tight when the door is closed. Automatic door bottom seals can be face mounted and some models can be fully concealed. They operate over uneven floor surfaces and like sweep seals can be used with Raven threshold plates that offer added protection against rain infiltration where doorways may be exposed to more severe weather conditions.
Most Raven door bottom seals are easily adjusted after installation without removing the door. This ensures an optimum seal is achieved and maximum performance is maintained in the event of minor building movement.
For Raven fire rated seals, smoke seals and acoustic seals click here - check the symbol guide on the product page for exact application.
A weatherseal particularly suitable for roll-up doors | Multi-blade seal defies rain infiltration | length 1000mm.
A weatherseal particularly suitable for roll-up doors | Multi-blade seal defies rain infiltration | length 2000mm.
A silicon rubber seal in a 15 micron anodised Aluminium carrier | The seal can be checked out or drilled to accommodate the pivot | Tested to over 1,000,000 operating cycles.
EPDM rubber sweep seal | Suits screen doors, sash windows and tilt-up doors | Easy and Quick to fit | Available in 1000mm stock lengths.
EPDM rubber sweep seal | Suits screen doors, sash windows and tilt-up doors | Easy and Quick to fit | Available in 2250mm stock lengths.
Heavy duty EPDM rubber sweep seal for outwards opening doors | Min/Max Gap: 5/20mm | 1000mm stock lengths
Heavy duty EPDM rubber sweep seal for outwards opening doors | Min/Max Gap: 5/20mm | 2000mm stock lengths
Concealed heavy duty sweep action seal - fitted in a morticed groove | Min/Max Gap: 5/20mm | 1000mm stock lengths
Concealed heavy duty sweep action seal - fitted in a morticed groove | Min/Max Gap: 5/20mm | 2250mm stock lengths
Heavy duty seal with compression properties | Similar to RP30 but with greater compression | Available in 1000mm stock lengths
Heavy duty seal with compression properties | Similar to RP30 but with greater compression | Available in 2250mm stock lengths
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 1070mm - can be trimmed to size.
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 1220mm - can be trimmed to size.
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 380mm - can be trimmed to size.
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 600mm - can be trimmed to size.
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 820mm - can be trimmed to size.
Raven RP8Si automatic drop-down, door bottom seal fitted with a smoke seal insert | Seal size 920mm - can be trimmed to size.