Door Bottom Seal - RP129Si

Key Points:

• Heavy duty door bottom seal
• Durability tested to over 1,000,000 operating cycles without failure.
• A silicon rubber seal in a 15 micron anodised Aluminium carrier.
• 
  Symbol Guide

Description:

A silicon rubber seal in a 15 micron anodised Aluminium carrier. The seal can be checked out or drilled to accommodate the pivot, thereby providing a continuous seal. Durability Tested to over 1,000,000 operating cycles without failure.

Specification:

• Location: Double butt hinged and centre pivot double acting doors.
• Min/Max Gap: 14mm to 18mm.
• Fixing Method: Zinc plated, cross recess S.T. screws of the appropriate size and colour are supplied.
• Seal Material: Silicon Rubber (SE) (Light grey)
• Fixing Method: Zinc plated, cross recess S.T. screws of the appropriate size and colour are supplied.
• Used in Conjunction Raven threshold plates. Raven RP115 Threshold Plate (1000mm or 2000mm) recommended.
• Seal Sizes: Available in 1250 mm lengths.
• Standard Finish: Anodised Satin Clear.

Installation:

We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on Tel: +(0)1329 841416 or email sales@stormflame.com

Maintenance:

All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 Code of Practice for the Installation and Inspection of Fire Stopping.

Competency:

It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.

Additional Notes:

For further information on installation requirements please refer to the door manufacturer data to ensure the compatibility of this product, if in doubt please contact the technical team on: Tel: +(0)1329 841416 or email sales@stormflame.com

Download and review any of the following information: