Click here to see the Symbol Guide
RAVEN RP8Si Automatic Door Bottom Seal
A medium temperature smoke automatic door bottom seal, with an extruded silicon sealing component.
RP8Si is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres.
Mounted into a 15mm x 34mm groove that has been morticed into the bottom edge of the door, it is operated automatically by pressure against the door jamb on its adjusting screw.
Conforms to Approved Documents B (Fire & Smoke) and E of the UK Building Regulations.
Location Single and double butt hinged doors.
Min/Max Gap 3mm/13mm.
Seal Sizes 1220mm, 1070mm, 920mm, 820mm, 600mm, 380mm to 295mm (min). Seals cut back to exact size.
Standard Finish Aluminium Anodised 15 microns. Satin Clear (silver) or Bronze finish.
Fixing Method Concealed, with supporting colour mathced stainless steel escutcheon plates. Screws supplied.
Seal Material Silicon Rubber (SE) (charcoal).
Optional Stainless steel rounded Escuthcheon Plate RP8cp2 (Clear) RPbp2 (bronze)
Escutheon Plate Dimensions
Rounded: 22mm wide, 57mm high, (f22 router bit) 1.2mm thick
Approvals
Fire & Smoke AUS/NZ: Conforms to BCA Spec. C3.4. Tested to AS 1530.4, AS/NZS 1905.1 & AS/NZS 1530.7.
UK/EU: Conforms to Approved Document B. Tested to ISO CD 5925-1(similar to BS EN 1634.1, BS 476 Part 20 & 22, Sec. 31.1).
Acoustic AUS/NZ:Conforms to BCA Sec.F5. Tested to AS 1191, AS 1045, AS/NZS 1276.
UK/EU:Conforms to Approved Document E. Tested to BS EN ISO140.3 (similar to BS EN ISO 717.1, BS 2750, BS 5821).
Durability tested to over 1,000,000 operating cycles without failure.
