Anti Graffiti Paint : Anti Marker Pen Paint
Graffiti Magic™ Anti Graffiti Paint is a translucent, non-sacrificial coating that allows easy removal of graffiti using warm water and mild detergents.
Protects against paint graffiti, marker pens and fly-posters.
'Straight from the tin application' - no mixing chemicals.
Apply by brush, roller or spray.
Long effective life - remove graffiti repeatedly without re-coating.
This anti graffiti paint is designed to minimise any alteration to the appearance of the protected surface and is available in a matt or gloss finish. If in doubt about the final appearance of the anti graffiti treated surface try a test application and consider applying a Non Darkening Sealer primer coat.
Graffiti Magic carries a warranty for ten years and does not need reapplication after cleanups.
Video showing old graffiti removal, application of anti-graffiti paint and washing off new graffiti.
Graffiti Magic anti graffiti coating can be used on concrete, render, masonry, porous stone, timber and previously painted surfaces, but should not be used over Pliolite based products.
The matt version is particularly effective on normally difficult to protect substrates such as rough brick or textured finishes.
See this Paint & Surfaces Guide on applying the paint to various surfaces and how to do a simple sample test for adhesion.
Short drying and re-coating times for rapid protection against graffiti.
Graffiti Magic preserves the substrate in the condition in which it is treated, cleaning and/or re-decoration must take place before treatment.
To clean away old graffiti prior to application of anti graffiti coating we offer two chemicals
Bare Surface Graffiti Remover and Shadow Lifter
Test for possible surface darkening if it is critical that the coated surface must appear exactly like the original. Consider using a Non Darkening Sealer primer coat.
General Application:
Apply by brush, roller or spray.
Can be thinned with up to 10% white spirit if needed.
2 coats recommended for all surface types.
Coverage on bare brick, concrete or stone - depending on how porous - is from 7 to 10 m2 per litre per coat.
Porous surfaces are best sealed with Non Darkening Sealer first, which also gives a slighly better coverage rate of Graffiti Magic of 8 to 10 m2 per litre per coat (still two top-coats required).
Previously painted and other non porous surfaces - 10 to 12 m2 per litre per coat (two coats required).
More technical and application information here - using anti-graffiti paint.
Graffiti Magic is used by these companies and public bodies:
